| Van
Steenburgh Engineering is now making the new Self Clearing Feature
available on their JV Series Reclaimer. This new feature calls on a
patented innovation that clears the system of any residual refrigerant
following use. It provides more flexibility in processing the complete
range of refrigerants, saving you valuable time in refrigerant
changeovers.
This new feature is offered as an
option to any new orders at a very reasonable cost. Give us a call to
discuss how it can help you save time and make your refrigerant
management program more effective. |
Reclaim for Profit
Reclaiming refrigerant should be a major source of
revenue in your day-to-day activities. Consider the savings if you reclaim only
the refrigerant you are now releasing. Include the amount you can save in your
testing/maintenance activities and the amount you can "pull" from each
cylinder before you send it back.
Our system pumps vapor and takes a system or cylinder to required EPA
vacuum levels.
Protect the Environment
Protection of the ozone is everybody's
responsibility...especially those of us in the industry who use CFC's.
Reclaiming refrigerant is one of the more positive steps towards meeting that
challenge. When combined with the obvious economic benefits it makes even more
sense.
Don't Just Retrieve -
Reclaim
The Van Steenburgh System reclaims refrigerant to the maximum. There
is a difference. Our system incorporates many unique features which
provide maximum separation of oil, acid, hard particle contaminants, moisture
and air. There is no comparison.
Maximum Separation Oil,
Acid and Moisture
The Van Steenburgh system provides maximum oil, acid, and oil
separation through its unique method of pumping the high velocity and high
temperature into the Separation Chamber as it drops to near zero velocity. This
causes the oil, acid, water and hard particle contaminants (chopper chips, etc.)
to drop to the bottom where they can be retrieved along with the maximum amount
of retrievable oil. No other system does this.
Sub Cooling
The vapor from the Separation Chamber passes through the
compressor to the air condenser where it is condensed to liquid. It then passes
to the chill chamber where it is sub cooled to 15° to 40°F. This aids in the
transfer of the refrigerant to cylinder or system at room temperature or warmer.
It also enhances the drying/filtering process. No other system does this.
Drying/Filtering
Sub cooled refrigerant dries more efficiently. We take advantage
by recirculating the sub cooled refrigerant at the rate of 300 - 400 lbs. an
hour (average based on ambient range). This means maximum drying. No other
system does this.
Pump Vapor
The Van Steenburgh system employs compressor liquid injection
during vapor removal This means we pump a cylinder or system to atmospheric
pressure without harm to the compressor! Get those last pounds.
Don't send them back to the vendor with your empty cylinders. No other
system does this.
Air Separation
The combination of sub cooling, which causes the air to rise
quicker, and the onboard storage where the refrigerant is constantly being
recirculated, means maximum air separation. The "air out" switch
allows you to purge this air. No other system does this.
Additional Features:
Oil site gauge on compressor Float valve safety shut-off on storage/chill
chambers (backed by 4 additional safety shut-offs) to prevent overfilling
on-board storage Laboratory quality gauges Visual check points on face of system to
monitor drying | 
