H10Xpro Refrigerant Leak Detector



		Unique easy-to-use design Unmatched sensitivity Refrigerant selective—no false alarms Pop-out, rechargeable battery Long sensor life 1 year product warranty Low price

Be a TOPGUN in the A/C service industry by using the H1OXpro TOPGUN Refrigerant Leak Detector. Designed, developed and manufactured by Yokogawa in the U.S.A., this new product is the world's first "point and locate" leak detection tool. With its comfortable pistol-grip design and patented sensor technology, you can depend on the TOPGUN to provide bullseye accuracy in locating difficult leaks.

Optional accessories/replacement parts:

Rugged carry/storage case
Long life battery
Battery charger
8" and 16" quick connect probe assemblies
Calibration reference bottle
Maintenance kit
Instruction manual

Product Features

New patented, heated triode, dispersive electron sensor technology with low power drain for long battery life. Excellent detection for all refrigerants.
First breakthrough in sensor design technology in over 25 years!
New airflow system assures quick response and fast recovery from full alarm.

Power Requirements

The pop-out, quick charge battery will run the unit continuously for a minimum of 3 hours continuous operation. In an "off and on" mode, 4-6 hours is the norm.

Measurement Features — Display Indication

Unit has both manual or automatic background compensation for alarm-free leak detection.
A three-position switch adjusts the unit for correct sensitivity for all refrigerants.
A .5 ounce per year (R134a) calibration reference bottle is included to verify both correct unit operation and leak sensitivity prior to test.
Four LED's quantify leak size and light individually, in series, simultaneously or flash to correctly indicate small, medium, large or gross leaks.
A battery status light shows green for a 25 to 100% charge condition. At 25% charge the LED turns yellow. When the battery is fully discharged &the unit turns off automatically and the LED turns red.
The small and medium sensitivity switch position is used to measure small, medium and large leaks of all refrigerants. The four LEDs light in series based on leak size to quantify a leak rate. Each LED indicates a defined ascending leak rate. The small sensitivity position is used for HFC fluorine-based refrigerants and blends. The medium position is used for CFC and HCFC refrigerants containing chlorine. An audible alarm increases in frequency as the leak size increases and more LEDs light up.
The LED light and the full alarm continues when a leak level of 2 ounces of HFC, 5 ounces of CFC or HCFC is detected with sensitivity switch in large position.
Sensor life is a function of the amount of refrigerant it sees. Expose it to pure refrigerant and life will be short. Use it normally looking for leaks and it will last for the season or longer. We specify 300 hours minimum. We warrant it for 12 months from date of purchase.

Warranty

One (1) year warranty on parts and labor from date of purchase.

SPECIFICATIONS
Sensing Element		Dispersed electron heated triode
Sensitivity		(moving prove test per SAE Std. J1627)
Alarm Sensitivity
SW Position	R134a		R12
Small	0.5 oz/year		0.1 oz/year
Medium	1.0 oz/year		.05 oz year
Large	5.0 oz/year		3.0 oz/year
Warm-up Time:		15 seconds
Accuracy:		Exceeds SAE J1627
Probe Length		2 probes—8" and 16"
Ambient Operating Temperature		32° to 104°F
Weight		1.2 lbs.
Agency Listings		UL file SA9717, SAE J1627, CE-Mark
Power Requirements		Pop-out, rechargeable 7.2 VDC battery
Leak Alarm		Audible and visible LED's
Response Time		< 1 second

MERCED A/C EQUIPMENT SERVICE, INC.

Factory Authorized Parts & Service Center
Vacuum Pump Remanufacturing
805 S. Fremont Ave. - Alhambra, CA 91803
tel: (626) 293-5710 - fax: (626)289-1196
sales@merced-ac.com

Web Design and Hosting by