Vinyl Dust Covers
Protect your investment with a heavy duty vinyl dust cover. Features corded seams for durability, medium gray color with Cool-Tech logo.
| 17495 | Fits all 17700a, 34700, 34234, 34234-2K, 34134A, 34134-2K Series |
| 17814 | Fits all 17800A, 17800-2K, 34800 Series |
| 17490 | Fits 34900, 34800-2K Series |
| 17492 | Fits 342000, 17700-2K, 34700-2K Series |
|
|
|
Refrigerant Tanks
| 17105 | 30 lb tank, 1/4" fittings (25150, 25175, 25200B, 34234, 34234-2K, 34800 Series) |
| 17506 | 50 lb tank, 1/4" fittings |
| 17571 | 30 lb tank with float switch (17650A series) |
| 17572 | 50 lb tank with float switch |
| 17576 | 30 lb tank, float switch, 3/16" fitting (17625A Series) |
| 17684 | Replacement tank float switch assembly for tanks used with 17625A, 17650A Series |
| 17686 | 50 lb tank with 3/8" fitting, float assembly for 17680A Series |
| 34130 | 30 lb tank for R-134a (34234, 34234-2K, 34800, 34134A, 34134-2K Series) |
| 34579 | 30 lb tank (34650 Series) |
| 34750 | 50 lb tank for R-134a (34700 Series) |
|
|
|
Oil Injectors
It takes just seconds to transfer an oil charge while the system is in a vacuum. The injectors are great add-ons to recovery/recycling and charging.
- Installs in-line on the low side of the manifold.
- Made of durable polypropylene with oil levels marked in ounces and milliliters.
- Solid brass fitting with a Lexan® handwheel.
| 18065 | Oil Injector with 1/4" SAE fitting |
| 34065 | R-134a Oil Injector with 1/2;"Acme fitting |
|
|
|
Recycling Filter-Drier
Specially blended for maximum acid and moisture removal.
| 16912 | Refrigerant Identifier Filter for 342000 and refrigerant identifiers |
| 17630 | Inlet Filter for 17625A |
| 17663 | Inlet Filter for 34650, 17650A |
| 17678 | XH-9 Filter Drier for 177800A, 17800-2K Series |
| 34430 | Quick Change Filter for older 17700A, 34450, 34700 Series |
| 34724 | Spin-On Filter for 17700A, 17700-2K, 34134A, 34134-2K, 342000, 34234, 34234-2K, 34700, 34700-2K, 34800, 34800-2K, 34900 Series |
|
|
|
Syringe-Type Injectors
Use these syringe-type injectors to add oil to a fully pressurized A/C system. Just fill the barrel with the amount of oil needed, connect the injector and press the plunger.
| 16256 | R-134a Oil Injector, 1/2" Acme quick coupler |
| 16258 | Oil Injector, 1/4" SAE fitting |
|
|
|
Maintenance Kits
Keeps recovery and recycling unit operating at peak efficiency with a convenient maintenance kit. contains one Quick Change filter-drier to be used on both R-12 and R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil.
See your instruction manual if you have questions about which filter-drier to use.
| 42140 | Maintenance Kit for 17700A, 17700-2K, 342000, 34234-2K, 34700, 34700-2K, 34800, 34800-2K, 34900 Series |
| 42130 | Maintenance Kit for early models using 34430 Filter-Drier (17700A, 34700) |
|
|
|
Automotive Retrofit Kits
| Model 34570 | Includes enough fittings to replace the access ports of five vehicles when retrofitting vehicles from R-12 to R-134a. Aluminum fittings have pre-applied thread sealant that won't strip out, making universal O-rings unnecessary. There are also 90° fittings for heavy duty applications. |  |
|
| Model 17545 | Kit includes high and low side fittings with pre-applied thread sealant that won't strip out, and 8 oz. of polyester oil, enough for retrofitting one vehicle from R-12 to R-134a. |  |
|
|
Quick SealTM Adapters
Quick SealTM fitting automatically shuts off the charging hose when you disconnect it from the system, so any refrigerant left in the hose is not released. This also prevents "finger burn" and adds an extra measure of safety. Made of solid brass.
| 10234 | 1/4" MFL to 1/4" FFL |
| 10242 | 1/4" MFL to 3/16" FFL |
| 10248 | 1/4" MFL to 1/4" FFL, 90 ° |
|
|
